Filter
Top Products
Replacing Toner
121
6
Replacing Toner
• Open the front cover of the machine.
• Pull out the lever under the toner bottle to-
ward you 90°.
• Raise the green lever, and then gently pull
out the toner bottle.
• Hold the new bottle horizontally, and then
shake it five or six times without removing
the outer cap.
• Remove the outer cap.
Note
❒ Do not remove the inner cap.
• Place the toner bottle in position, then
push it in until the green lever clicks.
Note
❒ If you cannot get it to click in, pull out
the toner bottle a little, slightly rotate it
to the right by 10 – 20°, then try again.
• Return the lever under the toner bottle to
its original position.
• Close the front cover of the machine.
MartiniC1_GBzen2_FM.book Page 121 Friday, April 19, 2002 2:18 PM