Ricoh 1060 All in One Printer User Manual


 
Configuring the Network
35
2
*1
Make necessary settings for your network environment. For details about settings,
see the Network Printing Guide.
*2
Configure TCP/IP when you use pure IP of NetWare 5/5.1.
*3
You will need the IEEE 1394 Interface Board (option).
*4
You will need the IEEE 802.11b Interface kit (option).
*5
Make necessary settings when the communication mode is Ad hoc Mode.
*6
Make necessary settings when the communication mode is 802.11 Ad hoc Mode.
Note
In a network environment using TCP/IP, you can use SmartNetMonitor to
configure IP addresses for Admin and the web browser packaged with Print-
er Controller or Printer/Scanner Controller. For details about Smart Net
Monitor, see the Network Printing Guide.
For details on setting values, see p.75 Settings You Can Change with User
Tools.
Scanner
(Network
Delivery
Scanner)
Wireless
LAN
*4
IP Address, Subnet Mask,
Gateway Address, Network
Boot, Effective Protocol, Inter-
face Select, Communication
Mode, Channel
*5
, WEP, SSID
*6
, Delivery Option
p.37 When using TCP/IP,
p.41 When using the Wireless
LAN Interface (option) in Ad
hoc Mode, p.42 When using
the Wireless LAN Interface
(option) in Infrastructure
Mode
Printer TCP/IP
*1
IP Address, Subnet Mask,
Gateway Address, Network
Boot, Effective Protocol, Inter-
face Select
p.37 When using TCP/IP,
p.38 Acquiring the IP Ad-
dress from the DHCP Server
NetWare
*1
*2
Effective Protocol, NW Frame
Type
p.38 When using Net-
Ware
IEEE 1394
*3
IP Address, Subnet Mask,
Gateway Address, Effective
Protocol (TCP/IP), IP over 1394
p.37 When using TCP/IP,
p.39 When using the IEEE
1394 Interface (option)
Wireless
LAN
*4
IP Address, Subnet Mask,
Gateway Address, Network
Boot, Effective Protocol, Inter-
face Select, Communication
Mode, Channel
*5
, WEP, SSID
*6
p.37 When using TCP/IP,
p.41 When using the Wireless
LAN Interface (option) in Ad
hoc Mode, p.40 When using
the Wireless LAN Interface
(option) in 802.11 Ad hoc
Mode, p.42 When using the
Wireless LAN Interface (op-
tion) in Infrastructure Mode
Mode Network
Environment
Network Settings Reference
MartiniC1_GBzen2_FM.book Page 35 Friday, April 19, 2002 2:18 PM