Ricoh 1060 All in One Printer User Manual


 
Combined Function Operations
48
3
Saving Energy
-
--
-Low Power Mode
If you do not operate the machine for a certain period after an operation or when
you press the {
{{
{Energy Saver}
}}
} key, the display disappears and the machine enters
Low Power mode. When you press the {
{{
{Energy Saver}
}}
} key again, the machine re-
turns to the Ready status. In Low Power mode, the machine uses less electric-
ity.
Note
You can change the setting of the Panel Off timer. p.83 Panel Off Timer
-
--
-System Reset
The machine returns to its initial condition automatically when your job is fin-
ished, after a certain period of time. This function is called System Reset.
Note
You can change the System Reset time. p.83 System Auto Reset Timer
-
--
-Auto Off
The machine turns itself off automatically after your job is finished, after a cer-
tain period of time. This function is called Auto Off.
Note
You can change the Auto Off time. p.82 Auto Off Timer
Auto Off Timer function will not operate in the following cases:
When a warning message is displayed
When the service call message is displayed
When paper is jammed
When the cover is open
When Adding Toner message is displayed
When toner is being added
When the User Tools/Counter screen is displayed
When fixed warm-up is in progress
When printer or other functions are operating
MartiniC1_GBzen2_FM.book Page 48 Friday, April 19, 2002 2:18 PM