Filter
Top Products
User Tools (System Settings)
82
5
Timer Setting
❖
❖❖
❖ Auto Off Timer
The machine turns off automatically to conserve energy after a specified
amount of time has passed following job completion. This function is called
“Auto Off”.
The machine status after Auto Off operation is called “Off mode” or “Sleep
mode”. For Auto Off Timer, specify the time to elapse before the Auto Off
function is activated.
Note
❒ Default setting: 1 minutes
❒ When in “Off mode” or “Sleep mode”, the machine can be ready for use
within 25 seconds.
❒ Auto Off Timer function will not operate in the following cases.
• When a warning message is displayed
• When the service call message is displayed
• When the paper is jammed
• When the cover is open
• When “Adding Toner” message is displayed
• When the toner is being replenished
• When the User Tools/Counter screen is displayed
• When fixed warm-up is in progress
• When the printer or other functions are operating
• When operations have been suspended during printing
• When the Data In indicator is on or blinking
• When the sample print or confidential print screen is displayed
❒ The time can be set from 1 minute to 240 minutes using the number keys.
❖
❖❖
❖ Energy Saver Timer
Set the amount of time the machine waits before switching to Low Power
mode after copying has finished or the last operation is performed.
The time can be set from 1 minute to 240 minutes using the number keys.
Note
❒ Default setting: 15 minutes
MartiniC1_GBzen2_FM.book Page 82 Friday, April 19, 2002 2:18 PM