Ricoh 1060 All in One Printer User Manual


 
User Tools (System Settings)
84
5
Set Time
Set the time for the copier's internal clock using the number keys.
Note
To change between hours, minutes and seconds, press the
[
]
and
[
]
keys.
Weekly Timer Code
Sets an 8-digit code to turn on the main power during a time frame in Week-
ly Timer.
Note
Default setting: OFF
If ON is selected, enter the timer code.
If ON is selected without entering the timer code, the machine cannot be
used, even if the power is turned on. If Off is selected, the machine can
be used without entering a timer code, when it is turned on.
Weekly Timer: (Monday-Sunday)
Set the power on timer using the number keys.
Interface Settings/Network
IP Address
Before using this machine with the network environment, you must config-
ure the IP address.
Note
Default setting: 011.022.033.044
Do not use an IP address that is used for another machine. To get the ad-
dresses, contact your network administrator.
If you install the IEEE 1394 Interface Board (option) and use the IEEE 1394
interface, you must set the address of the domain, different from the IP ad-
dress of [IEEE 1394]. If you intend to set the address for the same domain,
set a different value for the Sub-net Mask.
Press the [
] or [
] key to move in 3-digit increments.
Press the [Clear] key when the wrong address is entered.
Sub-net Mask
This is a number used to mathematically mask or hide an IP address on the
network by eliminating those parts of the address that are alike for all ma-
chines on the network.
Note
Default setting: 000.000.000.000
Press the [
] or [
] key to move in 3-digit increments.
Press the [Clear] key when the wrong address is entered.
MartiniC1_GBzen2_FM.book Page 84 Friday, April 19, 2002 2:18 PM