Filter
Top Products
Troubleshooting
250
5
Document Server
The machine cannot staple
this size of paper.
-- Select the proper paper size
that can be used in Staple
mode. See ⇒ p.61 “Staple”.
This paper is not available in
Duplex mode.
A paper size not available in
Duplex mode has been select-
ed.
Select a paper size that can be
used in Duplex mode. See ⇒
p.110 “Duplex”.
You cannot enter the desired
copy set number.
The number of copies exceeds
the maximum copy quantity.
You can change the maximum
copy quantity that you can
make at a time. See “Maxi-
mum Copy Quantity” in ⇒
p.295 “General Features
2
/
3
”
The indicated unit was not
set/installed correctly.
The B2 lever is released, but
not in the correct position.
Set the B2 lever in it's correct
position.
Machine Status Problem/Cause Action
The machine asks you wheth-
er you want to store pages
where scanning is finished as
1 file.
The number of scanned pages
exceeds the capacity per file of
the Document Server.
The maximum number of
pages per file you can store is
1,200 pages in the Document
Server. To store pages where
scanning is finished as 1 file,
press the [Yes] key. To cancel
scanning, press the [No] key.
Scanned pages became over
1,200 pages per file.
The number of scanned pages
exceeds the capacity of the
Document Server.
The maximum number of files
or pages per file you can store
is 200 files or 1,200 pages in
the Document Server. Delete
any unnecessary files and
then scan the document again.
Machine Status Problem/Cause Action