Filter
Top Products
Copying
44
2
Combined Auto and Manual Image Density
A Make sure that the [Auto Image Density] key is selected.
B Press the [Lighter] or [Darker] key to adjust the density.
Note
❒ If you do not wish to set any other functions, press the {
{{
{Start}
}}
} key to
start copying.
Selecting Original Type Setting
Select one of the following types to match your originals:
❖
❖❖
❖ Text
Select this mode when your originals contain only text (no pictures).
❖
❖❖
❖ Text·Photo
Select Text·Photo when your originals contain photographs or pictures with
text.
❖
❖❖
❖ Photo
Delicate tones of photographs and pictures can be reproduced with this
mode.
❖
❖❖
❖ Pale
Select this mode for originals that have lighter lines written in pencil, or for
faint copied slips. The faint lines will be clearly copied.
❖
❖❖
❖ Generation Copy
If your originals are copies (generation copies), the copy image can be repro-
duced sharply and clearly.
Note
❒ You can directly display the [Original Mode] key on the copy original display.
See “Original Mode Display” in ⇒ p.292 “General Features
1
/
3
”.
❒ You can adjust the quality level for each original type. See “Original Mode
Quality Level” in ⇒ p.292 “General Features
1
/
3
”.
❒ In Connect Copy mode, make adjustments to the original type on the master
unit.