Ricoh LD055 Copier User Manual


 
Settings You Can Change with the User Tools
17
1
Paper Size Setting
Menu Description
Paper Tray Priority You can select the paper tray which will be selected as a default in
the following conditions:
When the operation switch is turned on.
When System Reset or Auto Reset mode is turned on.
When the {
{{
{Clear Modes/Energy Saver}
}}
} key is pressed.
When Auto Paper Select mode is selected.
Note
Default:
Machine with LCT : LCT
Machine without LCT : Tray 1
Large capacity tray (LCT) is optional.
Tray 1:Paper Size Setting
Tray 2:Paper Size Setting
Tray 3:Paper Size Setting
Select the size of the copy paper set in the paper tray.
Note
When making the paper size setting for Tray 2, the setting of
the paper size selector has priority.
If the specified paper size differs from the size of paper actually
set in the paper tray, a paper misfeed might occur because the
paper size is not detected correctly.
When you set the tab stock in Tray 2, specify the paper size as
follows:
Metric version: A4K
Inch version: 8
1
/
2
" × 11"K
When you set the tab stock in Tray 2, you also need to specify
the paper type in Tray 2: Special Paper Indication of the User
Tools.
If you wish to change the paper size set in Tray 1, Tray 3, and
the optional large capacity tray (LCT), contact your service rep-
resentative.
Reference
See Changing the Paper Size in the Copy Reference manual.
Tray1
Tray2
Tray3
LCT
GCTRAY0E
MojitoC2b_GBsys_F_FM.book Page 17 Wednesday, July 31, 2002 2:16 PM