Filter
Top Products
Other Functions
85
2
Other Functions
Energy Saver Mode
If you do not operate the machine for a certain period after copying, or when you
press and hold the {
{{
{Clear Modes/Energy Saver}
}}
} key for more than one second, the
display disappears and the machine enters Energy Saver mode. When you press
the {
{{
{Clear Modes/Energy Saver}
}}
} key again, when the originals are set in the docu-
ment feeder, or when the document feeder is opened, the machine returns to the
ready condition. In Energy Saver mode, the machine uses less electricity.
Energy Saver mode makes a two-step reduction in electricity: one for the period
up to the time set for Low Power mode, the other for the period after that time.
Note
❒ If you press the {
{{
{Clear Modes/Energy Saver}
}}
} key during the operation, the cur-
rent settings will be cleared.
❒ It takes about 10 seconds to return to the ready condition from Energy Saver
mode.
❒ It takes about 30 seconds to return to the ready condition from Low Power
mode.
❒ If you press the {
{{
{Clear Modes/Energy Saver}
}}
} key while setting Connect Copy,
Connect Copy mode is canceled and the machine returns to the initial condi-
tion of Copy mode.
❒ If you press the [Connect] key on the master unit, the sub-unit exits Energy
Saver mode and enters Connect Copy mode.
❒ In Connect Copy mode, the sub-unit will not enter Energy Saver mode.
Reference
See “Low Power Timer” in the System Settings manual.