Filter
Top Products
If Your Machine Does Not Operate as You Want
253
5
Display
Connect Copy
Machine Status Problem/Cause Action
The display panel is off. The screen contrast knob is
turned to the dark position.
Set the screen contrast knob to
the light position for proper
viewing of the display panel.
The machine is in Energy Sav-
er mode.
Press the {
{{
{
Clear Modes/Energy
Saver
}
}}
} key to cancel Energy
Saver mode.
The operation switch is
turned off.
Turn on the operation switch.
Nothing happens when the
operation switch is turned on.
The main power switch is
turned off.
Turn on the main power
switch.
Machine Status Problem/Cause Action
The [
Connect
] key does not ap-
pear on the display.
The main power switch on the
sub-unit is off.
Turn on the sub-unit main
power switch.
The operation switch on the
sub-unit is off.
Press the operation switch on
the right side of the control
panel. The On indicator will
goes on.
Note
❒ The machine will be ready
to operate about five min-
utes after turning power
on.
The master unit is not in Copy
mode (i.e., in Document Serv-
er mode).
Press the {
{{
{
Copy/New Job
}
}}
} key
on the master unit to switch to
Copy mode.
The master unit is in Interrupt
mode.
Press the {
{{
{
Interrupt
}
}}
} key on the
master unit to exit Interrupt
mode.