Filter
Top Products
Copying
70
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu-
cent paper, postcards, and copy paper that cannot be set in the paper tray.
Limitation
❒ When copying several originals using the bypass tray, copies are delivered
face up (“Face Up Exit”) and in reverse order by default.
❒ You can change the setting to “Face Down Exit” only when you are using
high quality copy paper with a weight of 52 – 105 g/m
2
(14 – 28 lb. Bond). See
“Face-Up/Down Selection in Bypass Mode” in ⇒ p.311 “Count Manager”.
❒ If you have copies delivered face down when copying onto special paper,
such as adhesive labels, a paper misfeed may occur. Be sure to select “Face Up
Exit”.
Note
❒ If you wish to have copies delivered face down when only one original is set
on the exposure glass or in the document feeder, you must set the “Face-
Up/Down Selection in Bypass Mode” setting to “Face Down Exit” and the
“Face-Up/Down Selection in Platen Mode” setting to “Face Down Exit” with
the User Tools. See “Face-Up/Down Selection in Bypass Mode” in ⇒ p.311
“Count Manager” and “Face-Up/Down Selection in Platen Mode” in ⇒ p.309
“Input/Output”.
❒ The machine can automatically detect the following sizes as standard size
copy paper:
❒ If you do not use the standard size copy paper, you should input vertical and
horizontal dimensions. The sizes that you can input are as follows:
❒ To make copies onto OHP transparencies or thick paper exceeding 105 g/m
2
,
28 lb. Bond, specify the paper type in ⇒ p.73 “When Copying onto OHP
Transparencies or Thick Paper”.
❒ The maximum number of sheets you can set at a time depends on the paper
type. For details about paper capacity of the bypass tray, see ⇒ p.26 “Copy
Paper”.
❒ In Connect Copy mode, you can set only cover sheet paper and slip sheet pa-
per for the Cover/Slip Sheet function in the bypass tray.
Metric version A3L, A4L, A5L
Inch version A3L, 11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"L, 8" × 10
1
/
2
"K, 8" × 10"K,
5
1
/
2
" × 8
1
/
2
"L
Metric version • Vertical: 100 – 300 mm
• Horizontal: 140 – 432 mm
Inch version • Vertical: 4.0" – 11.7"
• Horizontal: 5.6" – 17.0"