Ricoh LD055 Copier User Manual


 
Getting Started
4
1
Network cable requirements
Optional Network Interface Board Type 450-E can be installed to allow direct
connection to an Ethernet network.
Network Interface Board supports 10BASE-T or 100BASE-TX connections.
You can use the machine in the following network environments:
Using the appropriate network management software and printer driver.
Attaching the machine to a networked computer set up as a server.
*1
Under Windows NT 4.0, only × 86 CPU is supported.
In a mixed network environment, the protocol switches automatically.
Reference
For more information about resolving network connection problems, see p.13
Configuring the Printer for the Network.
Note
Consult your network administrator before connecting the machine to a net-
work.
Be sure to use properly shielded and grounded cable (STP, Category/Type5)
for the connection to the host computer (and/or HUB) in order to meet FCC
and EMC Directive 89/336/EEC emission guidelines.
Parallel cable requirements
Connect the machine to the host computer using a parallel port. This machine
does not provide the parallel cable to connect the machine to the host computer.
The machine's parallel interface is a standard bi-directional interface. It requires
a standard 36-pin parallel cable compliant with IEEE 1284 and a parallel port
available on the host computer.
Note
Do not use a parallel cable that is longer than 3 meters (10 feet).
Client Windows 95/98/Me, Windows 2000/XP, Windows NT 4.0,
*1
, Mac
OS (optional PostScript 3 Kit Type 700 is required )
Driver PCL 6/5e, PostScript 3
File Server
NetWare 3.x, NetWare 4.x, NetWare 5.x
Protocol
TCP/IP, IPX/SPX, AppleTalk