Filter
Top Products
Using the Control Panel
36
4
System Settings Parameters
This section contains the information about the parameters used only for the
printer.
Reference
For more information about the other parameters in the System Settings
menu, see the “System Settings” manual.
Basic Page 1
Basic Page 2
Menu Description
Auto Off Timer The machine turns itself off automatically to conserve energy after
your job is finished, after the selected time. This function is called
“Auto Off”. The time can be set from 1 to 240 minutes.
Note
❒ Default: 90min.
❒ Auto Off might not be effective when an error message is dis-
played.
❒ To return to the ready condition from Auto Off, the machine
requires the same warm-up time as the time for becoming
ready after its power is turned on.
Menu Description
System Reset If no operation is performed for a selected time, the ma-
chine will automatically return to initially selected display.
This function is called “System Reset”. You can set the time
between 10 and 999 seconds.
Note
❒ Default:
60 seconds
Function Priority You can specify the mode that is displayed when the oper-
ation switch is turned on or System Reset is activated.
Note
❒ Default: Copy
Reference
See “System Reset”.