Filter
Top Products
Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Note
The actual names of the following applications do not appear on the following pages. Confirm which
applications you will be using before reading this manual.
Consumables:
Software Version Conventions Used in This Manual
• NetWare 3.x refers to NetWare 3.12 and 3.2.
• NetWare 4.x refers to NetWare 4.1, 4.11 and IntranetWare.
Power Source
120 V, 60 Hz, 9.0 A or more
Please be sure to connect the power cord to a power source as above.
Operator Safety:
This machine is considered a CDRH class 1 laser device, safe for office/ EDPuse. The machine con-
tains 5-milliwat, 760 - 800 nanometer wavelength, GaAIAs laser diodes. Direct (or indirect reflected)
eye contact with the laser beam might cause serious eye damage. Safety precautions and interlock
mechanisms have been designed to prevent any possible laser beam exposure to the operator.
Laser Safety:
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit
in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite
equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer.The laser
chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis and
laser subsystems to the factory or service depot when replacement or the optical subsystem is required.
Important
Parts of this manual are subject to change without prior notice. In no event will the company be liable for di-
rect, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
Caution:
Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Do not attempt any maintenance or troubleshooting other than that mentioned in this manual. This machine
contains a laser beam generator and direct exposure to laser beams can cause permanent eye damage.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts other
than genuine Ricoh parts in your Ricoh office product.
For good copy quality, Ricoh recommends that you use genuine Ricoh toner.
Descriptions in this manual Application
PRINTER MANAGER FOR ADMINISTRA-
TOR
Aficio Manager for Admin
PRINTER MANAGER FOR CLIENT Aficio Manager for Client
Consumables Name
Toner RICOH Toner Type 2210D Black
Photo Conductor Unit Photo Conductor Unit Type 320
Consumables Components
Maintenance Kit Type 270 Fusing Unit, Transfer Roller, Paper Feed Rollers, Friction Pads