Filter
Top Products
Setting Up the Printer
48
2
Loading Paper in PS420
(Paper Feed Unit)
Note
❒ You can load A4 long-edge feed
(Metric version) or 8
1
/
2
" × 11"
long-edge feed (Inch version) size
into PS420. If you want to change
the paper size A4 to 8
1
/
2
" × 11"
(Metric version) or 8
1
/
2
" × 11" to
A4 (Inch version), contact your
sales or service representative.
❒ Load paper of the same size in the
right and left sides of the paper
feed unit.
A
Slide the paper tray out until it
stops.
B
Load paper completely into the
tray.
Important
❒ Align the paper stack so that the
left stack is flush with the left
side, and the right stack is flush
with the right side.
❒ Do not stack paper over the lim-
it mark.
❒ Confirm that the end fence (A)
locks completely after loading
the right side paper.
❒ If you want to change the paper
size, contact your sales or ser-
vice representative.
Note
❒ To avoid paper multi-feeds,
shuffle sheets before setting
them in the tray.
❒ Load the paper face up onto the
tray.
❒ If either side or the leading edge
of paper is curled, straighten it,
and then load it.
C
Slide the tray into the printer un-
til it stops.
ZAEY200E
ZAEY201E