Filter
Top Products
Setting Up the Printer
28
2
B
Turn off the printer, and remove
all cables and cords from the
printer.
C
Remove the adhesive tape and the
packing materials.
D
Remove the two small covers
from the top right side of the
printer.
Note
❒ The removed small covers are
no longer required.
E
Use a coin to remove the two
screws on the right side of the
printer.
Note
❒ The removed screws are no
longer required.
F
Use the wrench to remove the two
socket screws from the cover on
the right side of the printer, and
remove the cover.
Note
❒ Keep the removed screws and
cover as they are required when
removing the duplex unit.
ZAEP412E
ZAEP200E
ZAEP511E
ZAEP510E