Filter
Top Products
Placing Originals
109
10
Placing Originals
To correctly display the top/bottom orientation of the scanned original on a cli-
ent computer, the placement of the original and the settings made on the control
panel and scanner driver must match.
There are 4 orientations for placing the original. See the table below.
Note
❒ Normally, an original is or , but in the table below, a square original is
used to make original orientation easy to understand. If the actual shape of
the original is different, the combination of original orientation and the orien-
tation specified on the control panel or scanner driver does not change.
*1
When using the machine as a network TWAIN scanner, this is the standard orienta-
tion for the TWAIN Driver. Normally, set the original this way.
An original to be scanned
Speci-
fy the
load-
ing
orien-
tation
of the
origi-
nal.
When scanning using
the e-mail function, the
Scan to Folder func-
tion, the Store function,
or the delivery scanner
function
(Specified on the con-
trol panel screen)
When scanning using
the TWAIN scanner
function
(Specified in the Scan-
ner Control dialog box)
In the [Rotate
Image:] menu
in the [Quali-
ty] group, se-
lect [OFF]
In the [Rotate
Image:] menu
in the [Quali-
ty] group, se-
lect [Right 90
deg.]
In the [Rotate
Image:] menu
in the [Quali-
ty] group, se-
lect [Left 90
deg.]
In the [Rotate
Image:] menu
in the [Quali-
ty] group, se-
lect [180 deg.]
Place the original.
Load the
original top-
edge first.
*1
Load the
original with
its top edge
touching the
left side of t he
exposure
glass.
Load the
original with
its top edge
touching the
right side of
the exposure
glass.
Load the
original bot-
tom-edge
first.
The original displayed on a
computer