Samsung 5935NX All in One Printer User Manual


 
Safety information_ 5
INSTALLATION / MOVING
Warning
Caution
MAINTENANCE / CHECKING
Caution
Do not place the machine in an area with dust,
humidity or water leaks.
This could result in electric shock or fire.
When moving the machine, turn the power off and
disconnect all cords; then lift the machine with at
least two people.
The machine could fall, causing human injury or
machine damage.
Do not put a cover over the machine or place it in an airtight
location, such as a closet.
If the machine is not well-ventilated, this could result in fire.
Do not place the machine on an unstable surface.
The machine could fall, causing human injury or machine
damage.
Make sure you plug the power cord into a grounded electrical
outlet.
Otherwise, this could result in electric shock or fire.
The machine should be connected to
the power level which is specified on the label.
If you are unsure and want to check the power level you are
using, contact the electrical utility company.
Do not overload wall outlets and extension cords.
This can diminish performance, and could result in electric
shock or fire.
Use only No.26 AWG
a
or larger, telephone line cord, if
necessary.
Otherwise, it can cause damage to the machine.
a. AWG: American Wire Gauge
Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters
(79”) with a 140V machine, then the gauge should be 16 AWG
or larger.
Otherwise, it can cause damage to the machine, and could
result in electric shock or fire.
Unplug this product from the wall outlet before
cleaning the inside of the machine. Do not clean the
machine with benzene, paint thinner or achol; do not
spray water directly into the machine.
This could result in electric shock or fire.
Keep cleaning supplies away from children.
Children (you) may get hurt.
When you are working inside the machine replacing
supplies or cleaning the inside, do not operate the
machine.
You may get injured.
Do not disassemble, repair or rebuild the machine by
yourself.
It can cause damage to the machine. Call a
certified technician when the machine needs repair.