Filter
Top Products
Media and tray
37
2. Menu Overview and Basic Setup
3
Loading paper in the tray
1
Open the tray. Then, adjust the tray size to the media size you are loading
(see "Tray overview" on page 36.)
2
Flex or fan the edge of the paper stack to separate the pages before
loading papers.
3
Place the paper with the side you want to print facing up and open the
output tray.
• Do not push the paper width guide too far causing the media to warp.
• Do not use a paper with a leading-edge curl, it may cause a paper jam or
the paper can be wrinkled.
• If you do not adjust the paper width guide, it may cause paper jams.
1
2
1
2