Filter
Top Products
Media and tray
44
2. Menu Overview and Basic Setup
The printed pages stack on the output tray. The printer sends output to the
output tray by default.
8
Preparing originals
• Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or larger than
216 x 356 mm (8.5 x 14 inches).
• Do not attempt to load the following s of paper, in order to prevent paper
jam, low print quality and machine damage.
- Carbon-paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is completely dry
before loading.
• Do not load originals that include different sizes or weights of paper.
• Do not load booklets, pamphlets, transparencies, or documents with other
unusual characteristics.
9
Loading originals
You can use the document feeder to load an original for copying, scanning, and
sending a fax.
In the document feeder
Using the document feeder, you can load up to 20 sheets of paper (80 g/m2, 20
lbs bond) for one job.
1
Flex or fan the edge of the paper stack to separate the pages before
loading originals.