Filter
Top Products
More Transmission Functions
31
3
More Transmission Functions
Auto Fax Reception Power-up
This machine can be set to shut down
automatically if nobody has used it
for a while. In these situations, even
though the operation switch is off, the
machine can still receive incoming
messages as long as the Main Power
switch is on.
Important
❒ Reception is not possible if both
the operation switch and Main
Power switch are turned off.
Note
❒ By default, messages are printed as
soon as they are received (Immedi-
ate Reception). To change this, see
P.72 “User Parameters” (Switch14,
Bit0).
Dual Access
The machine can scan other messages
into memory even while sending a
fax message from memory, receiving
a message into memory , or automat-
ically printing a report. Since the ma-
chine starts sending the second
message immediately after the cur-
rent transmission terminates, the line
will be used efficiently.
Note that during Immediate Trans-
mission or when in User Tools mode,
the machine cannot scan an original.
Transmission with Image
Rotation
For most purposes, set A4/LT origi-
nals in the landscape direction (L). If
you set an A4/LT original in the por-
trait direction (K), the image will be
sent rotated by 90°. Providing the re-
ceiver has A4/LT landscape paper
(L), the message will be printed the
same size as the original.
Limitation
❒ This feature is not available with
Immediate Transmission.
Checking the Transmission
Result
• Turn the Communication Result
Report on if you want a report to
be printed after every successful
transmission. See P.34 “Printed Re-
port”.
If you leave the Communication
Result Report off, the report will
not be printed after every trans-
mission. However, should a trans-
mission fail, a Communication
Failure Report will be printed in-
stead.
• If you turn the Transmission Re-
sult Report (Immediate Transmis-
sion) off, the Error Report will be
printed when the communication
on fails.
• You can also check the transmis-
sion result by examining the Jour-
nal. See P.21 “Printing the Journal”.
You can either print or scroll
through the Journal on the display.
See P.17 “Checking the Transmission
Result (TX File Status)”.