Filter
Top Products
Getting Started
12
1
Standby Display
While the machine is in standby mode
(immediately after it is turned on or af-
ter the {Cancel} key is pressed), the fol-
lowing display is shown.
Note
❒ To return the machine to standby
mode, do one of the following:
• If you have set the original and
have not pressed the {Start} key,
remove the original.
• If you have not set an original,
press the {Cancel} key.
• If you are in User Tools mode,
press the {User Tools} key or the
{Cancel} key.
Communication Display
While the machine is communicating,
the status is displayed.
❖
❖❖
❖ Display during Memory Transmission
or Memory Reception:
The destination's name or fax
number appears on the top of the
LCD display.
Note
❒ Even when the machine is sending
or receiving a fax message from/
into memory, you can still scan the
next original into memory.
❖
❖❖
❖ Immediate Transmission:
Display Prompts
Depending on the situation, the ma-
chine will show various prompts on
the display.
❖
❖❖
❖ Instructions and Requests
❖
❖❖
❖ Questions
❖
❖❖
❖ Selections
❖
❖❖
❖ Status