Filter
Top Products
Troubleshooting
60
4
When the {Facsimile} key is Lit in Red
If this key is lit, refer to the table below and take the appropriate action.
Problem Solution
Paper has run out. Add paper.
See Chapter 3 “Loading Paper” in the Copy
Reference.
The machine is in RDS (Remote Diagnostic
System) mode.
Wait with the
Main Power
switch on. Machine
will go to the standby mode after it exits from
the RDS mode.
A facsimile error has occurred. The facsimile has a problem. Contact a service
representative. The copier function will still
work normally.