Filter
Top Products
Key Operator Settings
60
6
E
Press the {
{{
{OK}
}}
} key.
Note
❒ If the key operator code is regis-
tered and turned on, enter the
key operator code and press the
{OK} key.
F
Confirm that "1. Counter" is dis-
played.
G
Press the {
{{
{OK}
}}
} key.
The number of pages transmitted
is displayed. You can display the
number of pages received,
scanned, or printed by pressing 0
or 1.
H
Once you have confirmed the
number of pages, press the {
{{
{OK}
}}
}
key.
I
Press the {
{{
{Cancel}
}}
} key on each
display until you reach the stand-
by display.
Authorized Reception
This feature helps you to reject junk
mail. It lets you specify which termi-
nals you wish to receive fax messages
from; the others will be shut out. This
is useful if you are very annoyed with
someone.
You can register the following:
• 30 Specified Senders (up to 24
characters for each sender)
•Wild Card
Important
❒ We recommend that you print the
Sender/Authorized Reception list
and keep it when you register or
change a sender. See P.64 “Sender
(Authorized Reception) List”.
Limitation
❒ You cannot register a Specified
Sender who does not have an Own
Name or Own Fax Number.
❒ You can register up to 30 senders
for Forwarding and Authorized
Reception functions. You some-
times cannot register 30 senders
depending on the number of send-
ers registered with other functions.
See P.65 “Forwarding”.
Note
❒ To find out a senders Own Name/
Own Fax Number, check the Jour-
nal.
❒ You can specify whether to only
receive messages from Specified
Senders, or to receive all messages
except those from Specified Send-
ers. The default setting is "Receive
from Authorized Senders". See
P.72 “User Parameters” (Switch08,
Bit2).