Filter
Top Products
Getting Started
8
1
Starting the Machine
To start the machine, turn on the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. See Chapter 2 “Settings
You Can Change with the User
Tools” in the System Settings.
-
--
-Power switches
This machine has two power switch-
es: See P.3 “Guide to Components”.
❖
❖❖
❖ Operation switch
Turn on this switch to activate the
machine. When the machine has
warmed up, you can make copies
or send faxes.
❖
❖❖
❖ Main power switch
If the machine dose not operate af-
ter turning on the operation
switch, check if the main power
switch is turned on. If it is off, turn
it on.
Important
❒ If you leave the Main Power
switch off for more than one hour,
all fax files in memory are deleted.
See P.9 “Turning Off the Power”.
Turning On the Power
A
Confirm that the power cord is
plugged into the wall outlet firm-
ly and the Main Power switch is
on.
B
Turn on the operation switch. The
On indicator should light.
The panel display will turn on.
Note
❒ If nothing happens when you
turn on the operation switch,
make sure the Main Power
switch is turned on.