Filter
Top Products
Key Operator Settings
84
6
PSTN Access Number
Use this setting to save having to en-
ter a pause after the outside line ac-
cess number when dialing. When you
program an access number, a pause is
automatically added as soon as that
number is pressed. For example, if
you register "0" as the PSTN Access
Number, a pause will be inserted au-
tomatically after dialing "0".
Limitation
❒ Outside line access numbers can be
up to 2 digits long.
❒ This feature does not work when
using On Hook mode or when di-
aling from an external telephone.
Note
❒ After you have registered an out-
side line access number, set the line
to "Extension" in "Select Line". By
default, this feature is set to "Out-
side".
To register an outside line access
number perform the following proce-
dure.
A
Press the {
{{
{User Tools}
}}
} key.
B
Press 0
00
0 or 1
11
1 until "4. Fax Fea-
tures" is displayed.
C
Press the {
{{
{OK}
}}
} key.
D
Press 0
00
0 or 1
11
1 until "6. Key Op.
Tools" is displayed.
E
Press the {
{{
{OK}
}}
} key.
Note
❒ If the key operator code is regis-
tered and turned on, enter the
key operator code and press the
{OK} key.
F
Press 0
00
0 or 1
11
1 until "9. PSTN Ac-
cess No." is displayed.
G
Press the {
{{
{OK}
}}
} key.
H
Enter the outside line access
number (2-digits) with the
number keys.
If you make a mistake, press the
{Clear/Stop} key and try again.
I
Press the {
{{
{OK}
}}
} key.
"Programmed" is displayed on the
screen.
J
Press the {
{{
{Cancel}
}}
} key on each
display until you reach the stand-
by display.