Filter
Top Products
Auto Reduction
11
1
Auto Reduction
By default, if the receiver's paper is
smaller than the paper you are send-
ing on, the message is automatically
reduced to fit onto the paper available
at the other end.
Important
❒ If you turn this feature off, the
scale of the original is maintained
and some parts of the image may
be deleted when printed at the oth-
er end.
Note
❒ You can switch this feature on and
off with the User Parameters. The
default setting is on. See P.72 “User
Parameters” (Switch01, Bit2).
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
B
Set your original and select any
scan settings you require.
C
Press the {
{{
{Transmission Option}
}}
} key.
The Transmission Option menu
appears.
D
Press 0
00
0 or 1
11
1 until "7. Auto Re-
duction" is displayed and press
the {
{{
{OK}
}}
} key.
E
Press 0
00
0 or 1
11
1 to select "On" or
"Off".
F
Press the {
{{
{OK}
}}
} key.
G
Press the {
{{
{Transmission Option}
}}
} key.
H
Specify the destination.
If you want to specify another des-
tination, press the {OK} key and re-
peat step H.
I
Press the {
{{
{Start}
}}
} key.
Transmitter
(This machine)
Receiver
Reduction
ND1X02E0
ND1X02E1