Filter
Top Products
Setting Originals
17
2
• Sticky originals, such as translucent paper
• Thin and soft originals
• Originals of inappropriate weight
• Originals in bound form, such as books
• Transparent originals, such as OHP transparencies or translucent paper
If the Machine Cannot Detect the Size of Your Original
If the machine cannot detect the original size, the following display is shown:
If this happens, carry out the following steps.
A
Press the {
{{
{Cancel}
}}
} key.
B
Make sure that the original is set correctly.
C
Remove the original and replace it on the exposure glass.
D
Press the {
{{
{OK}
}}
} key to scan the original again.
If the above display appears again, repeat steps A to D.
Note
❒ If the machine still cannot detect the original size, the following display is
shown. Press the {Transmission Option} key and select “4. Irreg. Scan Area".