Filter
Top Products
Error Messages and Their Meanings
59
4
Error Messages and Their Meanings
If there is an error, one of the following messages may appear on the display. It
might just flash up briefly, so if you are watching for errors, stay by the machine
and check the display.
Message Problem and Solution
Clear Misfed Orig. Remove original from ADF
Cover
Original misfeed
Remove originals from the Document Feeder.
Set any pages of the original that were not
scanned and send again.
Reset Original(s) and press Start Original jammed during Memory Transmis-
sion. Reset originals that have not been
scanned.
Clear Misfed Orig. Remove original from ADF
Cover
A document jam occurred during Immediate
Transmission. Press
{OK}
and resend the page
which has not been sent.
An error occurred during Immediate Trans-
mission. Press
{OK}
and resend the original.
Note
❒
There may be a problem with the machine
or the telephone line (for example noise or
cross talk). If the error re-occurs frequently,
contact your service representative.
Cannot detect original size. Reset original(s)
and press Start.
The machine failed to detect the size of the
original. Press the
0
or
1
key to select the size
and press the
{Start}
key three times.
L
Service call
Functional problem with the fax. Please con-
tact your service representative.
There is a problem with the fax function. Con-
tact your service representative and tell the
code number shown in the display. The copier
function will still work normally.
Memory is Full. Storing Stopped, Transmis-
sion Has Been Cancelled.
If you press
{OK}
, the machine returns to the
standby mode and starts transmitting pages
which has been scanned.
Exceed the Max. Cannot Add You cannot dial any more numbers. When
these files have been sent and their fax num-
bers are deleted from memory, additional fax
numbers can be dialed.