Savin 1018 Fax Machine User Manual


 
Faxing
16
2
Loading Originals in the
Document Feeder
Use the Document Feeder to scan in a
stack of originals in one operation.
Limitation
The maximum document length is
17" (432mm).
Place all the originals to be sent in
a single stack.
You cannot set originals in the
Document Feeder one page at a
time or in sheaves.
Do not open the Document Feeder
while it is scanning the originals or
your document could be jammed.
Note
When using Immediate Transmis-
sion mode, you cannot send origi-
nals longer than 17" (432mm). Use
Memory Transmission Mode in-
stead.
If an original jams, press the {Clear/
Stop} key then remove the original
carefully.
If your original is bent or folded,
flatten it before you set it.
Set thin originals on the exposure
glass.
Reference
For information about the sizes
and number of originals that can
be placed in the Document Feeder,
see Chapter 9 “Acceptable Types
of Originals” in the Advanced Fea-
tures manual.
A
Adjust the document guide to
match the size of your originals.
Align the edges of your originals
and stack them in the Document
Feeder face up.
1.
Limit mark
2.
Document guide
Originals unsuitable for the Document Feeder
Do not set the following types of originals in the Document Feeder because they
may be damaged. Place them on the exposure glass instead.
Originals of sizes other than those specified in the following table
Originals containing staples or clips
Perforated or torn originals
Curled, folded, or creased originals
Pasted originals
Originals with any kind of coating, such as thermosensitive paper, art paper,
aluminum foil, carbon paper, or conductive paper
Originals with index tabs, tags, or other projecting parts