Filter
Top Products
Setting Originals
13
2
Setting Originals
You can set your originals either in
the Document Feeder or on the expo-
sure glass. Some types of originals are
unsuitable for the Document Feeder
so they must be set on the exposure
glass.
Which way you place your original
depends on its size and whether you
are using the Document Feeder or the
exposure glass.
❖
❖❖
❖ How to set A4, B5, A5, 5
1
/
2
"×
××
×8
1
/
2
", 8
1
/
2
"×
××
×11,
8
1
/
2
"x14" and 8"x13" size originals
❖
❖❖
❖ How to set A5 and 8
1
/
2
"×
××
× 5
1
/
2
"size originals
Note
❒ When sending a fax, the image
output at the other end depends on
the size and direction of paper
used in the receiver's terminal. If
the receiver does not use paper of
the same size and direction as that
of the original, the fax image size
may be reduced on output,
trimmed at the both edges, or di-
vided into two or more sheets.
When sending an important origi-
nal, we recommend that you ask
the receiver about the size and di-
rection of the paper used in their
terminal.
❒ Make sure that all ink, correcting
fluid, etc., has completely dried be-
fore setting your original. If it is
still wet, the exposure glass will be
marked and those marks will ap-
pear on the received image.
❒ You can set the original any time
up until you press the {
{{
{Start}
}}
} key.