Filter
Top Products
Calling to Request a Message (Polling Reception)
5
1
Calling to Request a Message (Polling
Reception)
Use this function if you want to poll a
message from another terminal. You
can also poll documents from many
terminals.
There are two types of Polling Recep-
tion:
❖
❖❖
❖ Secured Polling Reception
If the Polling ID is programmed in
your machine, any messages wait-
ing in the transmitting machine
with the same ID are received. If
the other machine does not have
any messages waiting with the
same Polling ID, any messages that
do not require an ID are received
(Free Polling).
❖
❖❖
❖ Stored ID Override Polling Reception
You must enter an Override Poll-
ing ID unique to this transmission.
This ID overrides the Polling ID.
Your machine will receive any
messages waiting in the transmit-
ting machine with matching ID's.
If no ID's match, any messages that
does not require an ID are received
(Free Polling).
Limitation
❒ Polling Reception requires that the
other machine can perform Polling
Transmission.
❒ To receive a message sent by any
Secured Polling Transmission or
Stored ID Override Polling Trans-
mission, it is necessary to specify
the same Polling ID as the sender's.
❒ To receive a message sent by Se-
cured Polling Transmission or
Stored ID Override Polling Trans-
mission, the sender must be a ma-
chine of the same manufacturer
and equipped with the Polling Re-
ception function.
Note
❒ The communication fee is charged
to the receiver.
A
AA
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
B
BB
B
Press the {
{{
{Transmission Option}
}}
} key.
C
CC
C
Press 0
00
0 or 1
11
1 until " 3. Polling RX
” is displayed.
D
DD
D
Press the {
{{
{OK}
}}
} key.
Transmission
Request
Receiver
(This machine)
Sender
ND1X01E8