Filter
Top Products
Dialing
27
2
Note
❒
If a memory file is awaiting transmis-
sion and the
"Exceeded the
Max.Cannot Add"
message is dis-
played when dialing with the num-
ber keys, you cannot dial any more
numbers. That is because the fax
numbers have been dialed with the
number keys for some of the files
awaiting transmission. When these
files have been sent and their fax
numbers are deleted from memory,
additional fax numbers can be dialed.
❒ The display shows the percentage
of free memory space for storing
originals. Since fax numbers are
stored in separate memory, dialing
fax numbers with the number keys
does not change the percentage on
the display.
Pause
Press the {
{{
{Pause/Redial}
}}
} key when di-
aling or storing a number to insert
about a two-second pause.
Limitation
❒ You cannot insert a pause before
the first digit of a fax number.
Note
❒ A pause is shown as a "-" on the
display.
❒ You can insert a pause in numbers
stored in Quick Dials and Speed
Dials.
Tone
This function allows a machine con-
nected to a pulse dialing line to send
tone signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the {
{{
{p
pp
p}
}}
}
key, the machine dials the number us-
ing tone signals.
Limitation
❒ You cannot place a tone before the
first digit of a fax number.
❒ Some services may not be available
when using the {
{{
{p
pp
p}
}}
} key.
Note
❒ A tone is shown as a "•" on the dis-
play.
Using Quick Dials
You can specify destinations simply
by pressing the Quick Dial.
You must program the destination's
fax number in a Quick Dial before-
hand.
Additionally, you can store a name
for the destination in Quick Dials.
Note
❒ To register, edit, or delete a Quick
Dial, see p.38 “Quick Dial”
❒ To check the contents of all Quick
dials, print the quick Dial list. See
Chapter 5 “Printing Reports/Lists”
in the Advanced Features manual.
❒ You can have the label stored with
a Quick Dial printed on the first
page received at the other end.
Reference
p.26 “Dialing”