Filter
Top Products
Error Messages
63
4
Error Messages
If there is an error, one of the following messages may appear on the display. It
might just flash up briefly, so if you are watching for errors, stay by the machine
and check the display.
Message Problem and Solution
Clear Misfed Orig. Remove original from ADF
Cover
Original misfeed
Remove originals from the Document Feeder.
Set any pages of the original that were not
scanned and send again.
A document jam occurred during Immediate
Transmission. Press the
{
{{
{OK}
}}
}
key, and then re-
send the page which has not been sent.
An error occurred during Immediate Trans-
mission. Press the
{
{{
{OK}
}}
}
key, and then resend
the original.
Note
❒
There may be a problem with the machine
or the telephone line (for example noise or
cross talk). If the error re-occurs frequently,
contact your service representative.
Reset Original(s) and press Start
Original jammed during Memory Transmis-
sion. Reset originals that have not been scanned.
Memory is Full.Storing Stopped. After you press the
{
{{
{OK}
}}
}
key, you can select
whether to transmit pages which have been
stored in memory or to delete those pages.
Check the number of transmitted pages on the
Communication Result Report when you se-
lect to transmit those pages.
Exceeded the Max.Cannot Add You cannot dial any more numbers. When
these files have been sent and their fax num-
bers are deleted from memory, additional fax
numbers can be dialed.