Filter
Top Products
Setup Menu List
118
Menu Configuration and Detailed Settings
Shot
Transition
1)
Setting the
operating
conditions of Shot
Transition
Trans Time
2 to 15 sec (4 sec)
Set the time it takes to make a shot transition.
Trans Speed
1 to 10 (5)
Set the speed of the transition.
Time / Speed
Time / Speed
Determine whether to specify the transition by time or speed.
Trans Curve
Linear / Soft Trans / Soft Stop
Select the transition pattern.
Linear: To make the transition linearly
Soft Trans: To make the transition slowly at the beginning and
end, but linearly in between
Soft Stop: To make the transition slow down near the end
Start Timer
Off / 5 sec / 10 sec / 20 sec
Set the waiting time until the shot transition begins.
Rec Link
Off / Shot-A / Shot-B
Set the function to start a shot transition linked to recording
start.
Off: To start the transition using a button without linked to
recording start
Shot-A: To start a transition to Shot-A linked to recording
start
Shot-B: To start a transition to Shot-B linked to recording
start
MF Assist
1)
Turning the MF
Assist Function
on/off
On / Off Set to “On” to precisely adjust the focus automatically after
you roughly adjust it manually.
Color Bar Type
Selecting the types
of color bar
Multi / 75% / 100% Select the type of color bars displayed when you press the
BARS/CAM button.
Multi: To output multiformat color bars
75%: To output 75% color bars
100%: To output 100% color bars
Flicker Reduce
Setting Flicker
Compensation
Mode
Auto / On / Off
Off: UC model
Auto: Other models
Set the operation of the Flicker-Reduction function.
On: To always activate it
Auto: To automatically activate it when flicker is detected.
Off: To not activate it
Frequency
50 Hz / 60 Hz
60 Hz: UC model
50 Hz: Other models
Set to the power supply frequency of the light source causing
flicker.
Zoom Speed
Setting the zoom
speed
Note:If you set a value between 0 and 9, zooming may not operate smoothly, depending on the
individual characteristics of the lens or operating environments.
High
0 to 99 (70)
Set the speed of zooming to be executed when you press the
on-handle ZOOM button with the zoom speed switch set to
H.
Low
0 to 99 (30)
Set the speed of zooming to be executed when you press the
on-handle ZOOM button with the zoom speed switch set to L.
Remote
0 to 99 (50)
Set the speed of zooming to be executed when you press the
ZOOM button of the IR Remote Commander.
CAMERA SET
Menu items Subitems and setting values Contents