Filter
Top Products
Operating From the RM-B750/B150
140
Connecting External Devices
When the optional RM-B750 or RM-B150
Remote Control Unit is connected, various
settings of the camcorder can be performed from
the Remote Control Unit.
You can operate the menus of the camcorder and
monitor the picture on the RM-B750 or a video
monitor connected via the MONITOR connector
of the RM-B750/B150.
Connection
Using the remote cable (10 m) supplied with the
RM-B750/B150, connect between the REMOTE
connector of the camcorder and the camera
connector of the Remote Control Unit.
When you turn on the camcorder after the
connection, the camcorder enters Remote Control
mode.
Notes
• Use the RM-B750 of serial number 120000 or
higher.
• Pulling out the cheek pad may make
connection/disconnection of the remote cable
easier.
Adjusting the camcorder from the
Remote Control Unit
Turn on the camcorder by setting the power
switch to the CAMERA position (Camera mode).
The Picture Profile function is activated,
automatically selecting Picture Profile 6.
From this status, you can control menu and
recording operations from the RM-B750/B150.
For the functions that can be controlled from the
Remote Control Unit, see “Functions Operable
From the RM-B750/B150 (Camera Mode)” on page
142.
Notes
• Remote Control operations cannot be made if
USB connection to the camcorder is enabled.
• Do not connect or disconnect the Remote
Control Unit when the camcorder is on.
• The following controls of the camcorder
becomes inoperative when the Remote Control
Unit is connected.
—GAIN switch
—WHITE BAL switch
—SHUTTER switch
—BARS/CAM button
—WHT BAL button
—FULL AUTO button
• Direct menu operation of the camcorder is
disabled when the Remote Control Unit is
connected.
• The ECS frequency value displayed on the
Remote Control Unit may slightly differ from
that on the camcorder.
Releasing Remote Control mode
Turn off the camcorder and disconnect the RM-
B750/B150.
The settings on the controls on the camcorder
become valid.
In Remote Control mode, (the icon for the
Picture Profile menu) is displayed at the bottom
with the Setup menu icons, enabling you select
the Picture Profile menu from this screen.
Note
The menu items that cannot be set in Remote
Control mode are shaded and cannot be selected.
Operating the menu from the RM-B150
Set the camcorder to Camera mode by setting the
power switch to the CAMERA position in
advance.
1 Set the DISPLAY switch to MENU.
The menu of the camcorder appears on the
monitor screen connected via the MONITOR
connector of the RM-B150.
Operating From the RM-
B750/B150
Operating the Menus of the
Camcorder
PP
00:00
PP
A
uto
BLK
B
alance
Gain
Setup
Shutter
EX
S
lo
w
S
hutter
Shot
Transition
MF
A
ssist :
Off
C
A
M
E
R
A
SET
B
B
B
B
B