Filter
Top Products
Setup Menu List
128
Menu Configuration and Detailed Settings
Assign Button
Assigning
functions to the
assignable buttons
<1>
Off / Marker / Last Clip DEL /
ATW / Rec Review / Rec /
Freeze Mix / Expanded Focus /
Spotlight / Backlight / IR
Remote / Shot Mark1 / Shot
Mark2 / Fader / VF Mode / BRT
Disp / Histogram / Lens Info
Assign a function to the ASSIGN button of the corresponding
number.
The selectable functions are common.
Marker: For turning the markers on/off
Last Clip DEL: For deleting the last recorded clip
ATW: For turning ATW on/off
Rec Review: For starting a Rec Review
Rec: For starting/stopping recording
Freeze Mix: For executing Freeze Mix
Expanded Focus: For turning Expanded Focus on/off
Spotlight: For selecting TLCS Spotlight mode
Backlight: For selecting TLCS Backlight mode
IR Remote: For activating/deactivating the IR Remote
Commander
Shot Mark1: For adding shot mark 1
Shot Mark2: For adding shot mark 2
Fader: For turning the Fader function on/off
VF Mode: For switching between color and monochrome
modes of the viewfinder
BRT Disp: For turning the brightness level indication on/off
Histogram: For turning the histogram indication on/off
Lens Info: For turning the depth-of-field indication on/off
Off: No function
<2>
Off / Marker / Last Clip DEL /
ATW / Rec Review / Rec /
Freeze Mix / Expanded Focus /
Spotlight / Backlight / IR
Remote / Shot Mark1 / Shot
Mark2 / Fader / VF Mode /
BRT Disp / Histogram / Lens
Info
<3>
Off / Marker / Last Clip DEL /
ATW / Rec Review / Rec /
Freeze Mix / Expanded Focus /
Spotlight / Backlight / IR
Remote / Shot Mark1 / Shot
Mark2 / Fader / VF Mode / BRT
Disp / Histogram / Lens Info
<4>
Off / Marker / Last Clip DEL /
ATW / Rec Review / Rec /
Freeze Mix / Expanded Focus /
Spotlight / Backlight / IR
Remote / Shot Mark1 / Shot
Mark2 / Fader / VF Mode / BRT
Disp / Histogram / Lens Info
Tally
Setting the tally
lamps
Front
High / Low / Off
Set the brightness of the tally lamp on the front.
High: To brighten the lamp
Low: To dim the lamp
Off: To not light the lamp
Rear
On / Off
Turn the tally lamp on the rear on/off.
Hours Meter
Displaying the
hours meter
Hours (Sys) The non-resettable accumulated time of use is displayed.
Hours (Reset) The resettable accumulated time of use is displayed.
Reset
Execute/Cancel
Select “Execute” to reset the Hours (Reset) value to 0.
IR Remote
Activating/
deactivating the
Remote
Commander
On / Off Set to “On” to activate remote control operations from the
supplied IR Remote Commander.
Note
The setting automatically returns to “Off” when the
camcorder is turned off.
OTHERS
Menu items Subitems and setting values Contents