Filter
Top Products
Setup Menu List
123
Menu Configuration and Detailed Settings
VF SET Menu
VF SET
Menu items Subitems and setting values Contents
VF
Setting the
viewfinder
Color
–99 to +99 (±0)
Adjust the color of pictures in the viewfinder.
Mode
Color / B&W
Select the display mode of the viewfinder.
Color: Color mode
B&W: Monochrome mode
Peaking
Setting the peaking
function for the
viewfinder
Type
Normal / Color
Select the circuit to be used for the peaking function.
Normal: To use the VF DETAIL circuit of the viewfinder
Color: To use the peaking circuit of the camcorder
Color
White / Red / Yellow / Blue
When you select “Color” for “Type,” select the color of the
peaking signal.
Frequency
Normal / High
When you select “Nornal” for “Type,” select the frequency to
be detected by the VF DETAIL circuit.
Marker
Setting the
markers added to
pictures in the
viewfinder
Setting
On / Off
Turn all marker indications on/off in combination.
Safety Zone
On / Off
Turn the safety marker on/off.
Safety Area
80% / 90% / 92.5% / 95%
Select the size (ratio to the entire screen) of the safety zone
marker.
Center Marker
On / Off
Turn the center marker on/off.
Aspect Marker
On / Off
Turn the aspect marker on/off.
Aspect Select
4:3 / 13:9 / 14:9 / 15:9
Select the type of the aspect marker.
Guide Frame
On / Off
Turn the guide frame marker on/off.
Zebra
Setting the zebra
pattern
Zebra Select
1 / 2 / Both
Select the zebra pattern(s) to be displayed.
1: To display zebra 1 only
2: To display zebra 2 only
Both: To display both zebra 1 and zebra 2
Zebra1 Level
50 to 107 (70)
Set the display level of zebra 1.