Sony PMW-EX3 eBook Reader User Manual


 
Frame Recording
78
Recording
The Frame Recording function is especially
effective for clay animation recording.
The specified number of frames are recorded
intermittently when you press the REC START/
STOP button.
It is recommended to fix the camcorder to a tripod
or equivalent and use the IR Remote Commander
to start/stop recording rather than pressing the
REC START/STOP button of the camcorder.
Notes
Frame Recording cannot be set to “On”
simultaneously with Interval Recording or Slow
& Quick Motion. When you set Frame
Recording to “On,” Interval Recording and
Slow & Quick Motion are forcibly set to “Off.”
No audio recording is executed in Frame
Recording.
Frame Recording cannot be performed if an SP
video format is selected with “Video Format”
and “i.LINK I/O” is set to “Enable” with the
OTHERS menu.
Frame Recording cannot be performed if
“Video Format” of the OTHERS menu is set to
SP 1080/24P.
Before starting Frame Recording, make the
necessary settings on the CAMERA SET menu in
advance.
For details on menu operations, see “Basic Menu
Operations” on page 114.
1 Select “Frame Rec” of the CAMERA
SET menu.
2 Set “Setting” to “On.”
The camcorder enters Frame Recording
mode.
When the special recording mode indication
on the screen is active, “Frame Rec” flashes
on the screen.
3 Select the “Number of Frames” value
for one recording session.
You can select from among 2, 6, and 12 when
“Video Format” (page 52) is set to 720/60P
or 720/50P.
With other video formats, you can select
from among 1, 3, 6, and 9.
4 Exit the menu.
When the preparatory settings are completed, you
can start recording.
1 Press the REC START/STOP button.
Recording in Frame Rec mode begins.
The “Frame Rec” indication stops flashing.
When the number of frames you specified
with the menu are recorded, the camcorder
automatically enters FRM STBY (Frame Rec
Standby) status.
2 Press the REC START/STOP button
again.
Each time you press the REC START/STOP
button, the camcorder records the specified
number of frames then enters FRM STBY
status.
Notes
Recording cannot be stopped until the specified
number of frames are recorded. If the power
switch is set to OFF during recording, the power
is only shut off after the specified number of
frames are recorded.
The Freeze Mix function and Rec Review
function cannot be used while recording in
Frame Rec mode is in progress.
You cannot change the “Number of Frames”
setting while recording in Frame Rec mode is in
progress. To change it, pause the recording.
The timecode is recorded in Rec Run mode
(page 69) during Frame Recording.
Frame Recording
Preparatory Settings
00:00
Setting
N
u
m
ber
of
Fra
m
es
MF
A
ssist
:
Off
C
olor
B
ar
Type
:
Multi
Flicker
Reduce
Z
oo
m
S
peed
Interval
Rec
Fra
m
e
Rec
S&Q
M
otion
:
Off
: 1
C
A
M
E
R
A
SET
B
B
B
B
B
Performing Frame Recording