Filter
Top Products
Adjusting the Zoom
62
Recording
To adjust the target level with the Direct menu
The target level can also be selected using the
Direct menu.
When you press the DISPLAY/BATT INFO
button, the current setting is displayed on the
screen.
You can change the setting with the Direct menu
by operating the joystick or the jog dial.
For details on the Direct menu, see “Direct Menu
Operation” on page 26.
Note
Auto Iris motions may be different among lenses.
Adjust the “Speed” setting of “TLCS” (page 120)
on the CAMERA SET menu if needed.
Set the IRIS switch to MANU to adjust the iris
manually.
Rotate the iris ring for the desired iris opening.
You can adjust the zoom in Manual mode or
Power (Servo) mode on the supplied lens.
Manual Zoom mode
Rotate the zoom ring to adjust the zoom.
Power Zoom (Servo) mode
You can adjust the zoom by pressing the power
zoom lever or zoom button on the handle.
The supplied IR Remote Commander and
optional lens remote controller can also be used.
The current zoom position is displayed on the
screen in the range of 0 (Wide) to 99 (Tele) when
you press the DISPLAY/BATT INFO button.
The numerical indication can be changed to that
in a bar by changing the “Zoom Position” setting
of “Display On/Off” (page 124) of the VF SET
menu.
Switching between Manual mode and Servo
mode is performed with the ZOOM switch
located on the bottom of the camcorder.
Adjusting the Iris Manually
ND
1
++
F1.9 18dB
SHT
:1/2000
1 1.5 2 3 4 5 7 10 15 20 30 oo
m
CH1
CH2
Adjusting the Zoom
Switching the Zoom Mode
120min
STBY
STBY
A: 25min
B: 50min
Z99
120min
STBY
STBY
A: 25min
B: 50min
W
T