Filter
Top Products
PARTS REPLACEMENT
– 40 –
7. Printhead unit
(1) Remove the upper casing unit. (See 1. above.)
(2) Pull the pressure stay 1 forward to open the head
frame unit 2.
(3) Slide the head clamp 3 in the direction indicated by
the arrow. Remove the printhead unit 4.
(4) Remove the head connector 5.
Note : Be careful to avoid damaging the heat elements
when installing the replacement unit.
8. Feed Motor Assembly
(1) Remove:
• Printer mechanism (See 3. above.)
• Two tapping screws 1
• Feed motor assembly 2
4
5
2
1
3
2
1