StarTech.com M1400 Tablet User Manual


 
Chapter 4
Using Your Motion Tablet PC
Motion Computing M1400 Tablet PC User Guide 31
Launching Stand by or Hibernate Modes from the Start Button
1. Select Start>Shut Down.
2. From the pop-up window, tap Stand by or press the Shift key on the
keyboard to toggle to Hibernate, and then tap that option.
3. The Tablet PC will then enter Stand by or Hibernate. In Stand by, the
power LED flashes green. In Hibernate, all the status LEDs are off.
IMPORTANT: You can put the Tablet PC in either Stand by or Hibernate to swap the
battery. See the section “Swapping the Battery” in this chapter.
Launching Stand by Mode from the Motion Dashboard
Open the Motion Dashboard and then tap the Stand by button.
Setting Up Stand by or Hibernate Modes from the Power Switch
When you slide the power switch, by default your Tablet PC shuts down.
You can change this setting so that you can enter either Stand by or
Hibernate from the power switch.
1. Open the Motion Dashboard.
2. On the Dashboard, under Power Management, tap the down arrow by
the Pwr Button.
3. From the drop-down menu, select Stand by or Hibernate, as desired.
4. Select OK.
Restarting from Stand by or Hibernate Modes
To restart from Stand by or Hibernate, briefly slide the Power switch until
the Tablet PC display turns on. Tap your user name to resume work.
OPERATING THE
MOTION
D
IGITIZER PEN
The Motion digitizer pen contains internal
electronics that let you enter digital ink on the
Tablet PC display. Finger-tapping or writing
with a PDA stylus has no effect. The pen
contains a pen function button, used for right-
clicking (like a mouse) and a small opening near the end for attaching it to
the pen tether. The pen also comes with replacement pen tips and a
replacement tool, shown here. For information about replacing the pen tips,
see “Replacing the Pen Tips” in this chapter.
Notations for using the Motion pen are described below:
Tap — Firmly tap the pen on the Tablet PC display, without pressing the
function button on the pen
Double-tap — Tap the pen twice on the display, without pressing the
function button on the pen
Right-click — Press the function button on the pen and tap the pen on the
display (equals a mouse right-click). For more information about using