Appendix F Platform Commands 137
Example
The following example lists the steps you would perform to enable and run the
platform console:
1. Check or set the BIOS settings.
2. Run the command:
platform set console -s sp -S 19200 -e
3. Run the command:
platform set console
Return Codes
TABLE F-6 lists the return codes for this subcommand.
TABLE F-6 Return Codes for Subcommand platform console
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage, conflicting options
specified.