Sun Microsystems V40Z Server User Manual


 
Appendix H Service Processor Commands 165
SP DNS Subcommands
The subcommands in TABLE H-6 manage the DNS configuration on the SP.
SP Disable DNS Subcommand
Description: Disables the DNS configuration on the SP.
sp disable dns
When the SP is configured to use Dynamic Host Control Protocol (DHCP), DHCP
automatically configures DNS settings. Changes to the DNS settings in this
configuration can be replaced with the DHCP client.
Return Codes
TABLE H-7 lists the return codes for this command:
TABLE H-6 SP DNS Subcommands
Subcommand Description
sp disable dns Disables the DNS configuration on the SP.
sp enable dns Configures the DNS configuration on the SP.
sp get dns Displays the current DNS configuration on the SP.
TABLE H-7 Return Codes for Subcommand sp disable dns
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage, conflicting options
specified.
NWSE_RPCTimeout 2 Request was issued, but was not serviced by the server.
RPC procedure timed out and the request may or may
not have been serviced by the server.
NWSE_NoPermission 6 Not authorized to perform this operation.