Sun Microsystems V40Z Server User Manual


 
138 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide May, 2004
Platform Get Console Subcommand
Description: Retrieves the configuration information regarding the Service
Processor (SP) access to the platform serial console.
Format
Command format:
platform get console [{-H|--noheader}] [{-D | --delim
<DELIMITER>}]
TABLE F-7 lists the arguments for this subcommand.
The following output displays when successful:
Rear Panel Enabled Speed Pruning Log Trigger
SP Console Yes 115200 No 1024KB
or
Platform COMA No 19200 Yes 64KB
One of the other lines of data displays, depending on whether the rear-panel serial
port is connected to the platform or to the SP. See
TABLE F-8.
TABLE F-7 Arguments for Subcommand platform get console
Arguments Description
{-H |--noheader} Suppresses column headers.
{ -D | --delim } Delimits columns with the specified delimiter. Headings are also
delimited unless suppressed. The delimiter can be any character
or string.
TABLE F-8 Supplementary Output
Column Description
Enabled Displays No if the external serial port is connected to the platform.
Otherwise, the external serial port is connected to the SP console; you can
access the platform serial console through the SP command line by
running the subcommand platform console.