Filter
Top Products
216 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004
SP Get SNMP Proxy Community Subcommand
Description: Returns the community name the SP is currently using to proxy the
platform SNMP agent.
Format
Command format:
sp get snmp proxy community
Return Codes
TABLE H-81 lists the return codes for this subcommand.
SP Set SNMP Proxy Community Subcommand
Description: The SNMP agent on the SP acts as a proxy for the master SNMP agent
running on the platform. These proxy entries specify the OID to be referred, the
IP address to which they are referred, and the community string to use while
proxying. The community string is the value configured on the platform-side SNMP
configuration.
Format
Command format:
sp set snmp proxy community COMMUNITY STRING
TABLE H-81 Return Codes for Subcommand sp get snmp proxy community
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage, conflicting options
specified.
NWSE_RPCTimeout 2 Request was issued, but was not serviced by the server.
RPC procedure timed out and the request may or may
not have been serviced by the server.
NWSE_RPCNotConnected 3 Unable to connect to the RPC server.