Filter
Top Products
Appendix F Platform Commands 141
Return Codes
TABLE F-11 lists the return codes for this subcommand.
{-n | --noprune} Indicates that the platform console log should be the raw
console data. Cannot be used with: -p.
{-p | --prune} Indicates that the platform console log is to be cleaned of
ANSI sequences and pruned of duplicated information.
Cannot be used with: -n.
{-s | --serial}
{sp|platform}
Specify whether the serial port is connected to the platform
COMA port, or the SP serial console.
Cannot be used with: -e [platform] -d [platform]
-p [platform] -n [platform] -S [platform] -l [platform].
TABLE F-11 Return Codes for Subcommand platform set console
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage, conflicting
options specified.
NWSE_RPCTimeout 2 Request was issued, but was not serviced by the
server. RPC procedure timed out and the request
may or may not have been serviced by the server.
NWSE_RPCNotConnected 3 Unable to connect to the RPC server.
NWSE_InvalidArgument 4 One or more arguments were incorrect or invalid.
NWSE_NoPermission 6 Not authorized to perform this operation.
NWSE_NoMemory 8 Insufficient memory.
NWSE_DeviceError 25 Unable to read or write to the device.
TABLE F-10 Arguments for Subcommand platform set console
Arguments Description