Filter
Top Products
Appendix H Service Processor Commands 197
Return Codes
TABLE H-52 lists the return codes for this subcommand.
SP Reboot Subcommand
Description: Restarts the SP. This command is useful in emergency situations in
which you may not have physical access to a machine.
Format
Command format:
sp reboot [ {-f | --forced} ]
TABLE H-53 lists the argument for this command.
TABLE H-52 Return Codes for Subcommand sp get tdulog
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage, conflicting
options specified.
NWSE_NotFound 5 Entity (user, service, file, path or other) was not
found.
NWSE_NoPermission 6 Not authorized to perform this operation.
NWSE_MissingArgument 7 Missing argument(s).
NWSE_UnknownError 15 Miscellaneous error not captured by other errors.
NWSE_FileError 18 File open, file missing, or a read or write error
occurred.
NWSE_NotMounted 21 File system is not mounted.
NWSE_ServiceNotAvailable 24 Requested service is not available.
TABLE H-53 Argument for Subcommand sp reboot
Argument Description
{-f | --forced} Results in a hard power off.