Teac A200 Personal Computer User Manual


 
User’s Manual 8-8
Optional Devices
9. Replace the battery pack as described in Chapter 6, Power and Power-
Up Modes.
10. Turn the power on and make sure the added memory is recognized.
Removing Memory on Bottom Side
To remove the memory module, make sure the computer is in boot mode
then:
1. Be sure the power is off and all cables are disconnected from the
computer.
2. Turn the computer upside down and remove the battery and loosen the
screw securing the memory module socket cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Push the latches to the outside to release the module. A spring will
force one end of the module up.
5. Grasp the module and pull it out.
Removing the memory module
6. Seat the cover and secure its screw.
7. Replace the battery.
If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature before
you replace them.
Do not try to remove a memory module with the computer turned on. You
can damage the computer and the module.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
3
1
1
2
Latch