Filter
Top Products
User’s Manual 6-8
Power and Power-Up Modes
Battery charging notice
The battery may not charge right away under the following conditions:
n The battery is extremely hot or cold. To make sure the battery charges
to its full capacity, charge the battery at room temperature of 10° to
30°C (50° to 86°F).
n The battery is nearly completely discharged. Leave the AC adapter
connected for a few minutes and the battery should begin charging.
The Battery indicator may show a rapid decrease in battery operating time
when you try to charge a battery under the following conditions:
n The battery has not been used for a long time.
n The battery has completely discharged and been left in the computer for
a long time.
n A cool battery is installed in a warm computer.
In such case, follow the steps below.
1. Fully discharge the battery by leaving it in the computer with the power
on until the power automatically shuts off.
2. Plug in the AC adapter.
3. Charge the battery until the Battery indicator glows blue (depending the
model you purchased).
Repeat these steps two or three times until the battery recovers normal
capacity.
The charging time when the computer is on is affected by ambient
temperature, the temperature of the computer and how you use the
computer.
If you make heavy use of external devices the battery might scarcely
charge at all during operation. Refer also to the section Maximizing battery
operating time.
Once a battery pack is fully charged, it is recommended that you operate
the computer only on battery power until the battery pack completely
discharges. Doing so extends battery life and helps ensure accurate
monitoring of battery capacity.
Leaving the AC adapter connected will shorten battery life. At least once a
week, run the computer on battery power until the battery is fully
discharged, then recharge the battery.